News

Analysis Of The Causes Of The Failure Of Multistage Centrifugal Circulating Water Pump

Publish Time: Author: Site Editor Visit: 227

What happened to Sanitary Rotary Lobe Pump when it does not circulate:

1. Impeller stuck
There are many reasons why the multi-stage centrifugal circulating water pump does not circulate. For example, if the impeller of the water pump is stuck, the water pump will not work properly. There are a lot of scale or other debris in the medium transported by the water pump. These things may get stuck on the impeller of the circulating pump and cause the multi-stage centrifugal circulating water pump to get stuck.

2. Motor damage problem
If the motor fails, the multi-stage centrifugal circulating water pump loses power and the water pump cannot operate normally. The cause of the motor failure is generally due to motor aging or working in an environment that causes the motor to burn out.

3. Problems caused by cavitation
The causes of cavitation in multi-stage centrifugal circulating water pumps include excessive inlet resistance, high gas content in the medium, insufficient pump filling, insufficient pump inlet head, etc. Cavitation is more harmful to the circulating water pump, which will cause the pump to vibrate violently, destroy the balance of the pump, and cause damage to the pump bearings, rotors, and impellers.

4. No medium or small flow of conveying medium
If the conveying medium of the multi-stage centrifugal circulating water pump is small or there is no hot water flow, the main shaft and stable bearing of the water pump will be dry-grinded, and the bearing will be burned. The circulating water pump provides lubrication and cooling to the bearing by the medium. If there is not enough medium liquid to cool the bearing, the sliding bearing of the water pump will be easily damaged.

5. Damage to the isolation sleeve
The coupling of the multi-stage centrifugal circulating water pump is cooled by the medium conveyed by the water pump. If the conveyed medium has a large amount of particles and is relatively hard, the isolation sleeve of the water pump will be easily scratched or punctured, but sometimes it may also be damaged by improper maintenance methods.

Analysis Of The Causes Of The Failure Of Multistage Centrifugal Circulating Water Pump

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.