Characteristics And Application Of Cip Reflux Pump

CIP Return Pump is made of cast iron. Its characteristics are that the motor and pump are coaxial and the end cover is integrated, which makes the pump compact, small, light, stable, easy to install, and can completely replace IS, BA and other centrifugal pumps. It can be used for industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, cooling tower water supply, long-distance water supply, etc., cold and warm water circulation pressurization and equipment matching, medium temperature ≤80℃.

1. The pipeline pump is a vertical structure with the same inlet and outlet diameters and located on the same center line. It can be installed in the pipeline like a valve. It has a compact and beautiful appearance, small footprint, and low construction investment. If a protective cover is added, it can be placed outdoors for use.
2. The impeller of the pipeline pump is directly installed on the long shaft of the motor, with a short axial dimension and compact structure. The pump and motor bearings are reasonably configured, which can effectively balance the radial and axial loads generated by the operation of the pump, thereby ensuring the smooth operation of the pump, small vibration and low noise.
3. The shaft seal of the pipeline pump adopts mechanical seal or mechanical seal combination, imported titanium alloy sealing ring, medium-sized high-temperature resistant mechanical seal and hard alloy material, wear-resistant seal, which can effectively extend the service life of mechanical seal.
4. The pipeline pump is easy to install and repair, without dismantling the pipeline system, just remove the pump union seat nut to pull out all the rotor parts.
5. The pipeline pump can be used in series or parallel according to the use requirements, that is, the flow and head requirements.
6. ISG type single-stage single-suction vertical pipeline centrifugal pump_vertical pipeline booster pump can be installed vertically and horizontally according to the requirements of pipeline layout.

Uses of CIP return pump:
1. CIP return pump, this model is suitable for conveying clean water or working environment with slightly fine debris, suitable for industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, fire booster, long-distance transportation, HVAC refrigeration cycle, bathroom and other cold and warm water circulation booster and equipment matching, use temperature T<80℃.
2. IRG (GRG) vertical hot water (high temperature) circulation pump is widely used in: energy, metallurgy, chemical industry, textile, papermaking, as well as hotels and restaurants, etc., boiler high temperature hot water boost circulation and heating system circulation pumps, IRG type use temperature T <120℃, GRG type use temperature T <240℃.
3. IHG stainless steel pipeline chemical pump, stainless steel material, can choose stainless steel 304, 316, 316L, etc. according to the specific needs of users, for conveying liquids that do not contain solid particles, are corrosive, and have a viscosity similar to water. It is suitable for petroleum, chemical industry, metallurgy, electricity, papermaking, food and pharmaceuticals, and synthetic fibers. The use temperature is -20℃～120℃.
4. YG vertical pipeline oil pump, for conveying gasoline, kerosene, diesel and other petroleum products, the temperature of the conveyed medium is -20℃～+120℃.