Selection and installation of sanitary pump

Publish Time: Author: Site Editor Visit: 1063

Selection and installation of centrifugal pump

The sanitary pump should be selected according to the liquid to be transported, and the required performance should be checked, and the suction and discharge conditions should be analyzed, whether it is intermittent or continuous operation, etc. Centrifugal pumps should usually be operated at or close to the pressure and flow conditions specified by the manufacturer. The following rechecks should be carried out when the pump is installed:

① The size, position and elevation of the foundation should meet the design requirements, the anchor bolts must be properly and correctly fixed in the concrete foundation, and the machine should not be missing, damaged or rusted;

②According to the characteristics of the medium conveyed by the pump, the materials of main parts, shaft seals and gaskets should be checked if necessary;

③The leveling and alignment of the pump should meet the requirements of the equipment technical documents. If there is no requirement, it should meet the requirements of the current national standard "General Specification for Construction and Acceptance of Mechanical Equipment Installation Engineering";

④ All the pipes connected to the pump body, the installation of pipe fittings and the cleaning requirements of the lubricating oil pipes should comply with the relevant national standards.

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.