Six Major Functions Of Emulsification Pumps In Practical Fields

Emulsification Pump is a new type of conveying machinery, which is the most innovative type of pump in China. It uses compressed air as the power source, and can completely pump out all kinds of corrosive liquids, liquids with particles, high viscosity, volatile, flammable, and highly toxic liquids. This article mainly describes the 6 major functions of emulsification pumps in practical fields:

1. Since air is used as the power source, the flow rate is automatically adjusted with the change of back pressure (outlet resistance), which is suitable for medium and high viscosity fluids. The working point of the centrifugal pump is set based on water. If it is used for fluids with slightly higher viscosity, it needs to be equipped with a reducer or frequency converter, which greatly increases the cost, and the same is true for gear pumps.

2. Emulsification pumps are reliable and low-cost in flammable and explosive environments, such as the transportation of fuel, gunpowder, and explosives, because: First, it is impossible to generate sparks after grounding; second, no heat is generated during work, and the machine will not overheat; third, the fluid will not overheat because the diaphragm pump has minimal agitation of the fluid.

3. In harsh places on the construction site, such as construction sites, industrial and mining wastewater discharge, due to the large number of impurities and complex composition in the sewage, the pipeline is easy to be blocked, which will cause the electric pump to be overloaded and the motor to heat up and be damaged. The emulsification pump can pass particles and the flow rate is adjustable. When the pipeline is blocked, it will automatically stop until it is unblocked.

4. In addition, the emulsification pump is small and easy to move, does not require a foundation, occupies a very small area, and is easy to install and economical. It can be used as a mobile material conveying pump.

5. In the treatment of hazardous and corrosive materials, the diaphragm pump can completely separate the material from the outside world.

6. The emulsification pump can be used to transport fluids with relatively unstable chemical properties, such as: photosensitive materials, flocculants, etc. This is because the diaphragm pump has a low shear force and a small physical effect on the material.

The role of the emulsification pump in the industrial field is huge. Many things that are difficult for humans to complete manually can be completed by the emulsification pump, which indirectly guarantees the work safety of employees.